What are the Tips in Maintaining a Heat Press Machine

Share This:

There are significant ways for you to maintain one single machine and this depends on how you’re able to keep up in making sure that your equipment is still functioning. Of course, equipment does not last long, and it is always a wear and tear process. However, if you want to have a machine that will last you longer, maintenance is what you should need to do. Investing your money in purchasing a heat press machine is something that will support your dream goals in life. If you love what you are doing, surely it will take you a long way for you to have a great business.

If you have encountered a certain need to repair your machine because of the damage that you have experienced in the long run of use, then it would be best for you to start maintaining your heat press machine. For you to avoid further costs of money, here are the following tips that you will most likely follow.

  1. Upper platen must be kept clean- did you know that having a clean surface has a more factor in producing a better product than those that are left unclean? Therefore, it is a must for you to clean as you go. Every time you’re using your machine, be sure that you are making a habit of cleaning everything so that it will be again ready for work.
  2. The Teflon coating- one of the sensitive areas that you’ll need to consider in protecting your heat press machine is the Teflon space. This is a type of material that is present in the machine that coats the surface thus making it even cleaner. However, if you encounter scratches that are deeper, this will cause sticking of the Teflon to your material.
  3. Temperature- be aware of the things that you are using. Always follow the guidelines especially if you are using a heat press. Most common mistakes are taken for granted until such time that the machine is is no longer well-functioning.
  4. Keeping the Teflon from scratch free- there are particular degrees wherein you’ll experience a few scratches but for you to avoid ruining your material, always maintain the upper platen by covering it every after use.
  5. The rubber pad- using a lower degree of heat press will keep the platen in its good pace. So, this means that you’ll have to make sure that the rubber pad is not overheated. Another incite for you to remember to make sure that while you are loading the material keep away any metal and other accessories can cause damage to the rubber pad and as well as to the heat press machine as well.
  6. Greasing- it is essential that you grease the platen on a certain degree that it does not accumulate any formation of dirt that will cause your platen to loosen its Teflon coating. As you lubricate it with grease, it would be best to do it for at least once a month or if the machine is overused.

Tips for Decorating a T-shirt Using a Heat Press Machine

Share This:

If you wanted to print the image of your favourite band in your t-shirt or you wanted to showcase your doodle artworks by showcasing it to your shirts, then you should know how to decorate your t-shirt properly using a heat press machine. Here are some tips that you should always keep in mind to achieve the desired result:

Using the right heat press machine

Using the best heat press machine is very important because it can make or break your design. Make sure that you know how to choose the right heat press machine, even if you are just a beginner or you’ll only be using it for personal use. In buying one, you should consider the machine that comes with a timer, settings for adjusting both the temperature and pressure. A good rule of the thumb is buying the largest machine that you could afford out there because it’ll be more convenient and has a lot of advantages compared to smaller ones.

Using the right materials

You should also equip yourself with the required stock designs including the heat transfer materials, screen printed transfers, reflective, and even rhinestones if you feel like you need one. If you enjoy creating your design, you should unleash your creativity by using software for your design that you wanted to print on your t-shirt.

Choosing high quality t-shirt

It won’t even matter how good your design is or how to advance your heat press machine because if you tend to use a poor quality t-shirt, you will eventually end up having a poor quality design because the cheap material of the fabric will affect the whole printing process. There is a big tendency wherein the fabric will not be able to absorb the film thoroughly. Therefore, it is highly advisable that you choose a good quality t-shirt. You can use t-shirts that are made of 100% pure cotton, nylon, and polyester. Make sure that the type of the shirt that you are going to use matches the heat transfer design perfectly.

Accessories to support printing

There are several printing accessories that you can utilize to make sure that you will be able to achieve your desired results. These tools are not required for you to buy, but it can rest assured you that you will eventually come up with a nice print. For instance, you can use non-stick cover sheets in protecting the fabric that you are going to use and the design as well. Next is the non-stick heat printing pillow that is responsible for absorbing the seams and trims from your fabric to make sure that it will not be able to affect the design.

Now, just follow the tips above above to make sure that you’ll come up with a nice-printed t-shirt. These tips will help you to execute the printing process properly, and it will serve as your guide especially for beginners.

Heat Press Guide: How to Choose the Right One

Share This:

You may have noticed that t-shirt businesses are starting up almost everywhere around the world. People have begun taking notice of the demand for customized and creative t-shirts, and many have now started to consider opening their own company.

The business is quite profitable, which is why many entrepreneurs are willing to invest long term to get the right equipment for their startup.

If you are looking to earn a side buck, it might be a good idea for you to choose transfer paper as a means of getting your job done. However, if you want to grow your business and provide quality products to your customers, it would be a good idea for you to invest in a heat press. Going over the iron transfer method, there are a few things you need to know.

Firstly, the transfer will take a long time as you will need to make sure that the entire image has been printed correctly. Secondly, you will need to invest in a transfer paper, print the picture on it, and then start your transfer process. Third, the quality will not be as high as the picture will last only a few washes and it mostly likely won’t be machine-washable.

A heat press mostly works as the opposite of a transfer paper. Not only will you be able to achieve the outcome faster, but the results will also be of great quality. You will be able to duplicate the image and its colors better. And best of all, it will last for more wash cycles.

Reasons to invest in a heat press

If the fact that a heat press is the easiest method of transferring images onto T-shirts isn’t enough, we can give you an entire list of why you should be using a heat press instead of iron transfer.

Though both methods are great, there are a few key advantages available with a heat press. These include:

  • It has the ability to transfer faster – you will only need to press the machine once to transfer the image.
  • It allows you to transfer more in a limited period – as the process is faster, you can easily transfer more pictures in less time.
  • It’s a long-term investment – a high-quality heat press is guaranteed to last you a few years and will give you the desired outcome every single time. Hence, you will not need to worry about getting a new one anytime soon.
  • The outcome is better – the images transferred will look better than done from any other way. The colors will be more accurate, and it will look realistic. The product will also last more washes.
  • You do not need to spend too much to get an excellent machine – even on a limited budget, you will be able to find a great machine that will do as good a job as the expensive one.

Now that you know the advantages of using a heat press instead of an iron transfer, let’s move on.

Types of Heat Press

There are a lot of different kinds of heat presses available in the market, but two of those types are used the most in the printing business: the clamshell and the swinger press. Though these designs are highly popular, they are quite enormous and will require a lot of space.

Clamshell

The top part of this machine will lift in a vertical direction. The top will not take up too much space, so you do not need to worry about that. It does the job faster and is reasonably cheaper.

Swinger

The machine comes with an open mechanism. The top will open and swing to the side, taking up more space. However, the machine will provide more pressure and will be able to complete more products in one go.

The job that you need the heat press for will determine the type that you will need to buy.

How to choose the right heat press

Before the purchase of a heat press, you need to jot down some things that you should take into consideration before making your purchase. These factors will play an important role when you are evaluating a product.

Though it may seem overwhelming with the number of machines available with the seller, it can be easy when you know what you are looking for and what you need to look for are:

Size

A big heat press will be better than a smaller one as it will allow you to work on a variety of sizes. This, in turn, will help you widen your customer base.

Another good part about having a big heat press is that you will be able to fill more space on the t-shirt, which will allow you to offer a wider range of products.

Do keep in mind that a large heat press will allow you to use the method on different items. Customization will also be easier, which is what a lot of people are looking for these days. The wider the product range, the better, and you will be able to explore other products as well.

One thing that you will have to be careful about is the space the heat press will take. Be sure that you have enough room in your work area to easily accommodate the heat press. Check the dimensions before purchasing to compare the sizes better.

One size recommended for a heat press is 15×15. This size will allow you to perform some tasks and is lighter than most products, allowing for easy transfer.

Type

We will not go into too much detail about the kind as it has already been mentioned above. The job that you need to get done and the space you have available will determine the type of heat press you will require.

Brands

Many manufacturers are offering great heat presses at reasonable prices. You will, however, need to be careful about which brand you are willing to buy. A reliable one will go a long way.

A well-known name will need to be careful about its image. Hence, it will ensure that it offers the best product. Plus, it will provide an ideal warranty with its products.

Do a little research and look for the most recommended brand that has been on the market for ages. That is the brand you should consider buying.

I Broke My Heat Press Machine

Share This:

So today was a terrible day in the hyper ended up breaking my heat press machine. I was an idiot and try to do three sweaters at once in the heat press. Obviously, this was a dumb idea because a heat press is only meant to have one garment and in time. There wasn’t any real reason as to why I chose to put three in there at one time, other than I was nothing at all.

I was very short on time and decided that it would be a good idea to try and do this all at once. What ended up happening was that the heat press machine ended up being too overloaded and ended up going up in smoke. I was very lucky that I had a fire extinguisher which are nearby or else I could burn my house down.

My husband was not happy with me at all when he learned that I had almost burn the house down. He actually forbid me from ever using heat press machine again. This obviously breaks my heart since using woman reusing all the scraps that I have found was something that brought great pleasure to me.

I was actually contracted out by our local school to do a fundraiser involving all the clothing that I had made. I don’t know when I’m going to be able to tell them know that I can use my heat press anymore. And maybe only convince my husband to let me use it a few more times, her well, after I buy a new one. I mean it’s for charity after all great?

Anyways, I really wish I hadn’t broke my heat press machine. As cheesy as it may sound I was actually very attached to this machine. We’ve been through so many memories over the years and produce so many great quality pieces of clothing.

One thing that I can take solace in is that I’ll always have these pieces of clothing to remind me of the machine. It was actually super sad after I had almost burn the place down. I went and laid in the bathtub and dreamt of my heat press machine. Is that weird? It probably is.

If I ever been to buy another heat press and the filling going to get another power press machine. Absolutely love the way my last one performed and I know that an even newer one will perform better.

So lesson learned and in some advice to all of you out there. Never ever put three sweaters in heat press machine at once.

Where I Bought My Heat Press Machine

Share This:

I’ve had several people right into me over the past few days wondering what he press machine I ended up buying and where I bought it. Actually spent a good amount of time trying to find out what he press machine was going to be the right one for me. One of the several stores and spoke to several people about what he press machine was going to be best for me.

I knew that I wanted a clamshell heat press machine because they are the simplest ones to use. They’re also very versatile slope be able to use it for more than just clothing. If I wanted to swing away heat press machine, I’d also be spending a lot more money.

I was kinda confused as always going for the buying process because I didn’t know much about the heat press process. Luckily I was able to find a great site online which help me out with all the best heat press reviews. Here is the site where I found heat press ratings in 2017.

After I received my he press machine I immediately knew that I had chosen the right one. The power press heat press machine was incredibly easy to use and fit all of my needs. Within minutes I was up and running and creating my first piece of clothing. By the end the night I’ve made over 30 pieces of clothing without barely breaking a sweat. This was such an amazing feeling because my husband was incredibly happy because I was finally able to provide for the family.

I also started to sell some of these clothing online. Made a good amount of money doing that, which actually more than paid for the heat press machine itself.

Choosing the best heat press machine can be incredibly hard and that’s why I always suggest that you do your due diligence and read plenty of reviews and speak to plenty of people. I was able to find some great resources out there, including the website that I linked earlier. Remember though, everyone to salesman is going to be trying to sell you their version of what they think is best. Do your best to find the honest reviews then you can make the best appropriate decision for you.

I hope you found this helpful on where I bought the heat press machine and I hope that you have good luck in the future when you choose to buy yours.

Just Scrappin’ By

Share This:

Many working families were suddenly without jobs and without pay. This meant that they were unable to buy newer things, such as clothes for their family. Many people resorted to doing was either buying secondhand clothing or by making their own. This is one of the times in which people using scraps to make clothing was most abundant.

People were subtly taking all the scraps that they used to throw out in were either selling them together or making clothing with a heat press machine. That’s presently, this is when the most amount of heat press machines were ever sold in the history of mankind. While most people did not have a lot of money, they chose to invest in heat press because they know that they would make their return tenfold.

Even if you go to a thrift store and buy her clothing you’re going to be spending hundreds of dollars a year. Even if you get secondhand clothing you never know the quality of it and will end up replacing very quickly. This is why people chose to invest in heat press machine.

A press machine is made nowadays to last for over 10 years. This is a great improvement from years before when they would only last for two or three or stops. So people would buy these heat press machines and expect them to last route whatever depression that may had us. People take the unwanted garments in scraps of people had and would cut them up and combine them to make some wonderful clothing.

Before making heavier items such as sweatpants and sweatshirts. Before they began using a heat press these kinds of items were incredibly hard to make. However, since Ava heat press machines are very easy to make.

In fact one my favorite things to do during the depression was to make the jerseys that my kids would wear when they were doing their athletic sports. This coaches used to have to spend hundreds of dollars from a local printing shop in order to make them. I was able to do it for under $30 for a team of 15 kids. It’s kind of wondrous what you can do with a heat press machine.

Learning To Use Your Scraps

Share This:

Learning to use the scraps that you have when making your garments can be kind of odd thing to do. Most people are used to throwing away their extra scraps and feeling that they’re useless. However, one of the more important things to learn in life is to never be wasteful.

This thought process can be applied to garment scraps.

Garment scraps are one of my favorite things to repurpose in life. I’ve been able to make some very beautiful creations I’ve been able to gifted people around the holidays.

Typically able to repurpose them by either using a combination of sewing and heat pressing or simply by heat pressing.

I typically only have to sew the materials whenever I’m going to be making a larger items such as a. By nature, quilts are very large items. And by nature, quilts also made by joining together many materials.So naturally I’m going to have to sew them. After I’m done selling them that’s when I post on my heat press machine and make sure that I take some old scraps that I have, cut them up into designs, and then he press them onto the quilt.

I’ve been able to make some really cool things doing this. It’s actually also super easy to heat press scraps onto other material. You’re going to need a great heat press machine in order to do this, but that’s easy to buy since they’re readily available online.

In fact, it’s kind of stupid if you are able to use your scraps with their heat press machine. I need to do so the heat press machine to at least 300° and then it will be able to transfer heat. If you do less than 300° there is a chance that the garments may not stick together.

When making a quilt, you’re going to need a lot of scraps. So I generally save all my scraps from all the garments that I make and then pull them into a basket. After couple of months I’ve plenty of scraps available in order to make it quilt. Luckily for me this always falls around someone for their holiday so it works out.